Flow Sensor
Flow Sensor Energy Saving Product And Accessories Johor Bahru (JB), Malaysia Supplier, Rental, Services | JB COMPRESSOR SERVICES SDN BHD
CS-iTEC flow sensor S 400

The flow sensor is available in two measuring ranges S 400-S (standard range), S 400-M (max range). The unit can be ordered with and without local display.

The version with display shows the volumetric flow and the total compressed air  consumption. Via the keyboard tube diameters and the consumption counter can be set.

Various settings such as gas type, flow unit, reference standards, can be set ex factory or through our service kit. The service kit consists of a PC software and a interface box which connects the flow meter to the USB port of the PC.

Every flow meter includes an analogue output (4…20mA) for flow and a pulse output for the consumption counter.

 

 

The CS-iTEC flow sensor S 400 is based on the thermal mass flow principle.

 

It measure volumetric standard flow over a wide measuring range. The result is pressure and temperature independent. The sensor installation into the pipe is done through a ½” ball valve. This makes it possible to do the installation under pressure without shutting down the compressed air line.

Application

product_s400_2
Sensor installation through a 1/2″ ball valve under pressure Stationary flow station
s550_s  
 Portable flow station  

Product features

  • Insertion type sensor for installations under pressure
  • Thermal mass flow, independent of pressure and temperature
  • Velocity, flow and consumption can be displayed
  • IP65 casing provides robust protection in rough industrial environment
  • Very fast response time
  • High accuracy and wide measuring range
  • Tube diameters of 1″ to 12″ . Other diameters on request

Technical data

Measuring unit m³/h, m³/min, l/min, cfm, m/s, kg/min, kg/h, kg/s
Accuracy ±(3% of measured value + 0.3% full scale)
Medium Air, gas, non explosive
Operating temperature -30 … 140 ºC probe tube

 

-30 … 70 ºC casing

-10 … 50 ºC casing with local display

Operating pressure Up to 5.0 MPa
Analogue output Signal: 4 … 20 mA

 

Scaling: 0 … max range

Max.load: <=500R

Pulse output 1 pulse per consumption unit, insulated switch output, max. 30 VDC, 20mA
Power supply 12 … 30 VDC, 100 mA
Volumetric flow ranges
Inch DN mm CS 400-S [m³/h] CS 400-M [m³/h] CS 400-H

 

[m³/h]

1″ DN25 27.3 0.5~147.7 0.6~294.7 0.73~356.85
1¼” DN32 36.0 0.9~266.3 1.2~531.5 1.45~643.51
1½” DN40 41.9 1.2~366.7 1.5~731.9 1.82~886.18
2″ DN50 53.1 2.0~600.1 2.5~1197.6 3.03~1450.04
2½” DN65 68.9 3.5~1026.5 5.0~2048.6 6.05~2480.44
3″ DN80 80.9 5.0~1424.4 7.0~2842.7 8.47~3793.61
4″ DN100 100.0 10~2183.3 12~4357.2 14.52~6426.18
5″ DN125 125 13~3419.6 18~6824.4 21.78~9453.34
6″ DN150 150 18~4930.1 25~9838.9 30.25~13946.95
8″ DN200 200.0 26~8785.6 33~17533.3 39.93~21229.51
10″ DN250 250.0 40~13743.9 52~27428.5 62.92~33210.69
12″ DN300 300.0 60~19814.8 80~39544.1 96.8~47880.39

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version