Laser Particle Counter
Laser Particle Counter Energy Saving Product And Accessories   Supplier, Rental, Services | JB COMPRESSOR SERVICES SDN BHD
S 130 laser particle counter

S 130 is a new generation laser particle counter optimized for applications in compressed air or compressed gases. With quality in mind and with the knowledge of customers needs this instrument is designed for continuous operation 24 hours, 7 days a week. Depending on the selected model there is sensitivity available from 0.1 m up to 5.0 m. S 130 can fulfill the requirements stipulated in the compressed air standard ISO 8573-4. The measurement values represent the particle counts per ft³, l or m³ or alternatively in g/m³. Settings can be done through the integrated display, an external CS-iTEC display or through the service software.

Application

  • Medical air
  • Pharmaceuticals
  • Breathable air
  • Marine air
  • Food and beverage
  • Medical engineering
  • High speed trains
  • Semiconductor fabs
  • Conveyance of hygroscopic food
  • High tech processes
  • Electronics industry

Product features

  • Easy connection to compressed air through 6 mm quick-connector
  • Can be used as portable as well as stationary instrument
  • Particle sizes from 0.1 … 5.0 μm (depending on model)
  • Optional display
  • Measures according to ISO 8573-4
  • Output signals:
    – RS-485 / Modbus/RTU
    – SDI (CS-iTEC internal signal)
    – Relay switch (NO)
  • Connectable to CS-iTEC displays and data loggers as well as third parties displays and control units

Technical data

Technical data S 130
Measuring medium Compressed air and gases free of corrosive, aggressive, caustic and flammable constituents
Models: S 130-A
S 130-B
S 130-C
S 130-D
S 131
2 channels: 0.3, 0.5 m
4 channels: 0.2, 0.3, 0.5 and 1.0 m
4 channels: 0.5, 1.0, 3.0 and 5.0 m
2 channels: 0.5 and 5.0 m
4 channels: 0.1, 0.5, 1.0 and 5.0 m
Counting efficiency 50% (per JIS)
System pressure 0.2 … 0.8 MPa
Flow rate S 130: 2.83 l/min
S 131: 28.3 l/min
Sampling rate One sample per minute
Calibration NIST traceable
Measuring unit Particle counts per ft³, l or m³ , selectable Concentration in μg/m³
Gas connection 6 mm quick connect
Electrical connection M12 connector
Gas temperature 0 … 40 ºC (at inlet)
Ambient conditions 10 … 40 ºC
Transport temperature -30 … +70 °C
Output signal RS-485, Modbus/RTU
SDI (internal CS-iTEC signal)
4 … 20 mA
Alarm relay
Power supply 24 VDC, 5 W
Application Downstream of filters wherever upstream drying and filtration is applied
Casing / dimensions PC, Al alloy, 271 X 205 X 91 mm
Classification IP65
EMC According to IEC 61326-1
Settings Various sensor settings can be performed through the related service software
Weight 1900 g

请留下您的询问,我们会尽快回复您。


*只支持 gif, jpeg, jpg, png, pdf
Switch To Desktop Version